找回密码
 注册

QQ登录

只需一步,快速开始

搜索

[Emerson] DeltaV TM KJ1710 and KJ1740 Installation Instructions Fiber Switch

[复制链接]
babo 发表于 2024-7-7 00:56:34 | 显示全部楼层 |阅读模式
内容类型
内容类型: 文档
文档下载: 12P3517D.pdf (358.92 KB, 售价: 20 E币)
This document provides guidelines for the installation of the DeltaVTM KJ1710X1-BA1 Single Port Fiber Switch and KJ1740X1-BA1 Four Port Fiber Switch in locations with potentially explosive atmospheres.Laws, standards, or directives applicable to the intended use must be observed. In relation to hazardous areas, Directive 1999/92/EC must be observed. The corresponding ATEX certificates and IECEx certificates are an integral part of this document. The KJ1710X1-BA1 and KJ1740X1-BA1 were evaluated for the following hazardous locations and are labeled accordingly.
 ATEX - Zone 2 (ATEX Marking: II 3 (1)G Ex nA [op is Ga] IIC T4 Gc
Applicable Standards:
- EN 60079-0:2012
- EN 60079-15:2010
- EN 60079-28:2015
 ATEX Certificate KEMA 04ATEX1175X
 IECEx Certificate DEK 11.0069X
Applicable Standards:
- IEC 60079-0:2012
- IEC 60079-15:2010
- IEC 60079-28:2015
 FM - NI CL I, DIV 2, Groups A, B, C, D;
CL I, ZN 2, IIC; T4 Ta = 70C
Fiber optic port:
AIS CL I, DIV 1, Groups A, B, C, D;
CL I, ZN 0, AEx [ia] IIC; T4 Ta = 70˚C
Installation shall be in accordance with:
 ATEX - EN 60079-14.
 FM - Article 500 of the National Electrical Code, ANSI/NFPA-70.
 Any local-specific regulations.
您需要登录后才可以回帖 登录 | 注册

本版积分规则

QQ|手机版|小黑屋|ELEOK |网站地图

GMT+8, 2024-11-22 00:40

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表